By Sean Fancher, Better Built Ohio

Kitchen with white cabinets and granite countertops in an Akron-area home

If you live in Akron, Canton, or anywhere in Summit or Stark County, kitchen cabinets are usually the single most expensive part of a remodel — and the most-regretted decision when buyers cut corners. This guide is the same conversation we have with homeowners every week in our Akron showroom. No sales pitch, just the trade-offs you need to weigh.

The three cabinet tiers (and what they actually mean)

1. RTA (Ready-to-Assemble) Cabinets

RTA cabinets ship flat and you (or your installer) screw them together on site. They are the budget tier — typically $80–$150 per linear foot for a basic shaker box. Good RTA lines use plywood boxes, dovetail drawers, and soft-close hardware. Bad RTA lines use thin particle board with stapled joints and will fail in a rental within 3–5 years.

RTA is the right call when: you are flipping, the budget is tight, or you are doing a rental. It is the wrong call when: you want a 20-year kitchen with custom heights or unusual layouts.

2. Semi-Custom Cabinets

Semi-custom is the sweet spot for most Akron homeowners. You pick from a fixed lineup of door styles, woods, and finishes — but you can size individual boxes in 3-inch increments, add specific organizers (trash pull-outs, spice racks, tray dividers), and choose interior finishes. Pricing usually runs $200–$400 per linear foot installed. Lead time is 4–8 weeks.

3. Custom Cabinets

Custom means a local cabinetmaker is building your boxes to any dimension, any species, any finish. Pricing starts around $500 per linear foot and climbs fast. This is the right answer for historic homes with weird wall angles, very tall ceilings, or one-of-a-kind designs. For a standard 10×10 kitchen, custom is rarely worth the premium over good semi-custom.

Wood species — what holds up in Northeast Ohio

Finishes — beyond “white shaker”

White shaker is still 60%+ of what we install at our Akron cabinet showroom, but trends are shifting:

Hardware that lasts

Spend the money on soft-close hinges and undermount drawer slides. Blum and Salice are the two names worth knowing — both are rated for 75 lbs+ and 100,000 cycles. Skip the cheap side-mount slides; they fail within 5 years on heavy drawers (pots, pans, plates).

The five most common cabinet-buying mistakes

  1. Buying online without a measurement check. A 1/2″ wall bow throws off the entire run. Always get a pro measurement before ordering.
  2. Skipping the toe-kick detail. Cheap kits leave a particle-board kick that swells if mopped. Match your finish material.
  3. Under-ordering filler strips. Walls are never square. Order an extra filler per run.
  4. Forgetting the appliance gap math. A 30″ range needs 30.5″+ rough opening. Measure twice.
  5. Choosing finish before countertop. Countertop slabs are unique — pick the slab first, then match the cabinet finish.

What we recommend for Akron homeowners in 2026

For a primary residence you plan to stay in for 5+ years, go semi-custom with maple or MDF painted shaker boxes, full plywood construction, soft-close everything. Expect to spend $8,000–$18,000 on cabinets for a typical 12×14 Akron kitchen.

For a rental or flip in Summit County, RTA shaker in white or light gray with quality soft-close hardware will get you to market for $3,500–$6,000 on the same footprint.

The cabinets are the bones of the kitchen — get this decision right and everything else (countertops, backsplash, hardware) becomes easy.

Get a Free Cabinet Design Consult

Or contact our Akron showroom to see door samples in person.

Leave a Reply

Your email address will not be published. Required fields are marked *

📞 Book Service Call